Vlan Setting Example; Two Separate 802.1Q Vlan - Planet Networking & Communication WGSD-10020HP User Manual

The page includes the following fields:
Object
 Port Members
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.

4.6.10 VLAN setting example:

- Separate VLAN
- 802.1Q VLAN Trunk
- Port Isolate

4.6.10.1 Two separate 802.1Q VLAN

The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in
Switches.
Figure 4-6-7 Port Isolation Configuration page screenshot
Description
A check box is provided for each port of a private VLAN. When checked, port
isolation is enabled on that port. When unchecked, port isolation is disabled on
that port. By default, port isolation is disabled on all ports.
Figure 4-6-8 appears and
User's Manual of WGSD-10020 Series
Table 4-6-9 describes the port configuration of the Managed
123