Circuit Description; Cmos Block; Cm-1016 Board - Sony HXR-NX80 Service Manual

Section 5

Circuit Description

5-1.

CMOS Block

5-1-1.

CM-1016 Board

The CM-1016 board is a 1.0 type stacked CMOS image sensor board.
This board mainly contains a CMOS image sensor (IC1003), a master clock oscillator (X1001), and a 2.9 V constant-
voltage regulator (IC1001, IC1002). Power is supplied to this board from the VC-1045 board through the 51-pin
connector (CN1001). The CMOS image sensor converts an optical signal to an electrical signal, and its internal A/D
converter converts the electrical signal to a 12-bit digital signal. This digital signal is converted to an 8-lane high-speed
differential serial signal, and this serial signal is output from the 51-pin connector (CN1001) to the VC-1045 board.
5-1
HXR-NX80/HXR-MC88