Sony HXR-NX80 Service Manual page 64

2. Remove the ZM-1005 board.
(1) Disconnect the five flexible board from the connectors (CN4501 to CN4504, CN4507) on the ZM-1005 board.
(2) Remove the screw.
Note
This screw cannot be reused. Discard the screw removed once in servicing. Instead, use a new screw.
(3) Release the hook, and then remove the ZM-1005 board.
Flexible board
CN4504
CN4501
Precision screw
(P1.7 x 2.5)
3. Install the removed parts by reversing the steps of removal.
HXR-NX80/HXR-MC88
Flexible board
CN4507
CN4503
CN4502
ZM-1005 board
Hook
Flexible boards
Flexible board
3-38