6.
Install the filter frame (1730).
(1) Attach the dust protection ring (A, 1730).
(2) Tighten the four screws to attach the filter frame (1730) so that the position of the gauge mark is on the upper
side.
Gauge mark
Tapping screws (P1.7 x 5)
7.
Prepare a new 1 group ornamental tape and replace the old adhesive paper on the front ornament (1730) with new
one.
Front side
1 group ornamental
plate sheet
8.
Install the front ornamental (1730).
HXR-NX80/HXR-MC88
Dust protection ring (A, 1730)
Filter frame (1730)
Back side
Front ornament (1730)
Convex portion
1 group ornamental plate sheets
Concave portion
Front ornamental (1730)
3-52