Sony HXR-NX80 Service Manual page 96

7. Install a new HS-1003 board.
(1) Connect the flexible board (control switch block (GZ92000)) to the connector (CN702) on the HS-1003 board.
(2) Arrange the extra length of the flexible board (operation switch block (GZ92000)).
(3) Align the switch with the knob, and then attach the HS-1003 board.
(4) Tighten the one screw to attach it.
Switch
Knob
8. Install in the reverse procedure of steps 1 to 5 in procedure.
HXR-NX80/HXR-MC88
Precision screw
(PTP2 x 5)
HS-1003 board
CN702
Flexible board
(Control switch block (GZ92000))
Extra length
3-70