Sony HXR-NX80 Service Manual page 70

2. Remove the VC-1045 board.
(1) Release the two bosses and hook, and then open the VC-1045 board.
(2) Disconnect the two flexible boards from the two connectors (CN4001, CN 4004) on the VC-1045 board.
Boss
(3) Disconnect the coaxial cable from the connector (J7381) on the VC-1045 board.
(4) Release the hook and two bosses, and then remove the HDMI holder from the VC-1045 board.
Coaxial cable
J7381
3. Install the removed parts by reversing the steps of removal.
HXR-NX80/HXR-MC88
Boss
Hole
VC-1045 board
Boss
CN4004
CN4001
Hook
Hole
Holes
Boss
Hook
HDMI holder
VC-1045 board assembly
Hole
3-44