Sony HXR-NX80 Service Manual page 45

4. Remove the cabinet (R) assembly.
(1) Open the HP lid, and then remove the two screws.
HP lid
(2) Release the two bosses and projection, and then open the cabinet (R) assembly.
(3) Disconnect the flexible board from the connector (CN4701) on the CK-1019 board.
5. Install the removed parts by reversing the steps of removal.
HXR-NX80/HXR-MC88
Precision screw
(P1.7 x 4)
Precision screw
(P1.7 x 4)
Projection
Flexible board
CN4701
(CK-1019 board)
Cabinet (R) assembly
Bosses
3-19