4.
Install a new 1 group lens assembly.
(1) Attach the 1 group shims (1730).
(2) Align the mark position of the 1st group lens assembly as shown in the figure, and tighten the three screws
to attach it.
Align the
mark with
the
mark.
Tapping screws (P1.7 x 5)
5.
Align the white circle portion of the ornamental ring (1730) and the terminal portion of the flexible board of the
lens assembly, and install it.
Ornament ring (1730)
HXR-NX80/HXR-MC88
1 group lens assembly
Terminal portion of the flexible board
White circle portion
1 group shims (1730)
3-51