P Frame Moving Assembly (1730) - Sony HXR-NX80 Service Manual

3-15-4.

P Frame Moving Assembly (1730)

Note
Before disassembling the main unit, be sure to set the zoom to the Tele end and turn off the camera.
Preparation
1. Remove the cabinet (G) assembly. (Refer to
2. Remove the heat sink (GP) assembly. (Refer to
3. Remove the GR-1003 board. (Refer to
4. Remove the top cabinet assembly. (Refer to
5. Remove the EF-1003 board. (Refer to
6. Remove the IR-1009 board. (Refer to
7. Remove the inner mold (T) assembly. (Refer to
8. Remove the cabinet (R) assembly. (Refer to
9. Remove the BT panel assembly. (Refer to
10. Remove the ZM-1005 board. (Refer to
11. Remove the VF assembly. (Refer to
12. Remove the MS-1037 board. (Refer to
13. Remove the VC-1045 board. (Refer to
14. Remove the lens assembly. (Refer to
Procedure
1. Peel off the tape, and then remove the screw.
Tapping screw (P1.4 x 3)
HXR-NX80/HXR-MC88
"3-2. Cabinet (G)
"3-3. Heat Sink (GP)
"3-4. GR-1003 Board".)
"3-5. Top Cabinet
"3-6. EF-1003 Board".)
"3-7. IR-1009 Board".)
"3-8. Inner Mold (T)
"3-9-1. Cabinet (R)
"3-10-1. BT Panel
"3-11. ZM-1005 Board".)
"3-12. VF Assembly".)
"3-13. MS-1037 Board".)
"3-14. VC-1045 Board".)
"3-15-1. Lens Assembly".)
Tape
Assembly".)
Assembly".)
Assembly".)
Assembly".)
Assembly".)
Assembly".)
3-58