Sony HXR-NX80 Service Manual page 95

5. Remove the handle cover (upper) assembly.
(1) Remove the three screws.
(2) Disconnect the flexible flat cable from the connector (CN701) on the HS-1003 board.
Handle cover (upper) assembly
6. Remove the HS-1003 board.
(1) Disconnect the flexible board (control switch block (GZ92000)) from the connector (CN702) on the HS-1003
board.
Precision screw (PTP2 x 5)
HS-1003 board
HXR-NX80/HXR-MC88
Precision screws (P2 x 4)
CN702
Flexible board (Control switch block (GZ92000))
CN701 (HS-1003 board)
Precision screw (P2 x 4)
Flexible flat cable
3-69