Mitsubishi Electric MELSERVO-J3 Series Instruction Manual page 78

4. OPERATION AND FUNCTIONS
(3) Setting example
Magnetic pole detection
Parameter No.PS09 setting value
Overload and overcurrent alarm
Here, the final setting value of the parameter No.PS09 is set to 49 (the setting value at the occurrence of the
overload and overcurrent alarm 70 0.7).
30 35
Existence or nonexistence
Carry out the magnetic pole detection repeatedly while making
the setting value of the parameter No.PS09 larger.
4 - 7
40 45 65 70
An alarm has occurred
when the setting value
of the parameter
No.PS09 is set to 70.