Mitsubishi Electric MELSERVO-J3 Series Instruction Manual page 35

2. DIRECT DRIVE MOTOR
Connector
Feature
configuration
IP67
EN compliant
D
General environment
(Note 1)
Note 1. Not comply with the EN.
2. The connector to be mated.
Connector
Feature
configuration
IP67
EN compliant
E
General environment
(Note 1)
Note 1. Not comply with the EN.
2. The connector to be mated.
Connector
Feature
configuration
Type
F IP67 Straight
Note 1. The connector to be mated.
2. Purchase from Toa Electric Industry Co. Ltd., Nagoya Branch
Plug Cable clamp
Plug (DDK)
Type Model name
CE05-6A22-22SD-D-BSS
Applicable wire size: AWG 10 to 8
Straight
D/MS3106B22-22S
Applicable wire size: AWG 10 to 8
Plug Cable clamp
Plug (DDK)
Type Model name
CE05-6A32-17SD-D-BSS
Applicable wire size: AWG 6 to 4
Straight
D/MS3106B32-17S
Applicable wire size: AWG 6 to 4
Plug
Plug (Hirose Electric)
Plug Cord clamp
RM15WTPZ-12P(72) JR13WCCA-8(72)
Cable clamp (DDK)
Overall
diameter of
cable
[mm]
(Reference)
9.5 to 13
12.5 to 16
15.9 or less
(bushing ID)
Cable clamp (DDK)
Overall
diameter of
cable
[mm]
(Reference)
22 to 23.8
23.8 or less
(bushing ID)
Cord
clamp
Recommended cable
(Bando Densen)
Model name
20276
VSVPAWG#23×6P
KB-0492 (Note 2)
2 - 10
Direct drive motor power
supply connector (Note 2)
Model name
CE3057-12A-2-D
CE3057-12A-1-D
CE05-2A22-22PD-D
D/MS3057-12A
Direct drive motor power
connector (Note 2)
Model name
CE3057-20A-1-D
CE05-2A32-17PD-D
D/MS3057-20A
Absolute position storage
Overall
unit connector
diameter of
(encoder side) (Note 1)
cable
[mm]
(Reference)
8.2 RM15WTRZB-12S(72)