Table of Contents
Advertisement
Setting Up
Installing Options
R CAUTION:
• Before installing options, the machine should be turned off and unplugged
for at least an hour. Components inside the machine become very hot, and
can cause a burn if touched.
2
• Before moving the machine, unplug the power cable from the outlet. If the
cable is unplugged abruptly, it could become damaged. Damaged plugs or
cables can cause an electrical or fire hazard.
• When lifting the machine, use the grips on both sides. The machine could
break or cause an injury if dropped.
By installing options, you can improve the printer performance and have an ex-
panded variety of features to use. For details on each option, see Administrator
Reference 2.
Important
❒ Rating voltage of the connector for options: Max. DC 24 V. For installing op-
tions with Scanner Unit being installed, contact your sales or service repre-
sentative.
When installing multiple options on the printer, we recommend the following
order of installation.
❖ ❖ ❖ ❖ Flow of Option Installation
A
Attach the 500, 1000-sheet Paper
Feed Unit, or 2000-sheet Large
Capacity Tray.
(PAPER FEED UNIT Type
3800C, Paper Bank PS 470)
B
Install the SDRAM Module.
(Memory Unit TypeB)
C
Install the 1394 Interface Unit.
(1394 Interface Unit Type1045)
18
Attach the Paper Feed Unit to the bottom of the printer.
You can choose to install the PAPER FEED UNIT Type
3800C (500 × 1), Type 3800C (500 × 2) or Paper Bank PS470.
If you install the Paper Bank PS470, you can load up to 3,100
sheets of paper at once.
T
Install the module to the SDRAM module slot of the Con-
troller Board.
There are three types of Memory Unit TypeB, 64MB, 128MB,
256MB.
T
Install the 1394 Interface Unit Type 1045 to the 1394 I/F slot
of the Controller Board.
The 1394 Interface Unit requires optional Memory Unit at
least 64 MB (Total memory size 128 MB or more).
T
Advertisement
Table of Contents
