Installing The 1394 Interface Unit Type1045 - Ricoh Aficio AP3800C Setup Manual

Setting Up
I I I I
Tighten two screws to fasten the
Controller Board back into its
original position using provided
screwdriver.
2
Note
❒ Be sure to return the provided
screwdriver to its original posi-
tion on the inside of the front
cover.
Note
❒ After finishing all installation
for printing, you can check
whether the Memory Unit is in-
stalled properly. Print the Con-
f i g u r a t i o n P a g e f r o m t h e
"List/Test Print" menu. If it is
installed properly, you will see
the memory capacity for "Total
Memory".
❒ If the Memory Unit is not in-
stalled properly, reinstall from
A
step
properly even after reinstalla-
tion, contact your sales or serv-
ice representative.
Reference
See p.69 "Test Printing".
32
. If you cannot install it
Installing the 1394 Interface
Unit Type1045
Important
❒ Windows 2000 is the only operat-
ing system that can output to a
printer with the 1394 Interface
Unit.
❒ Outputting is not possible with
Windows 95, 98, or Me. If the "plug
and play" function starts, click
[Cancel].
❒ The 1394 Interface Unit Type1045
ZDJP031J
requires the optional Memory Unit
at least 64 MB or more.
❒ In Windows 2000, the 1394 Inter-
face Unit can only be used with
Service Pack 1 or later. If the Serv-
ice Pack is not installed, the con-
nectable number of devices in a
1394 bus is only one, and the client
cannot access the 1394 Interface
Unit without using an account that
has the Administrators permission.
❒ The 1394 Interface Unit cannot re-
ceive data from more than one PC
at the same time. If it happens, an
error message appears. The printer
can accept data sent from other
PCs only after the first print job has
finished.
❒ Bidirectional transmissions are not
supported by the 1394 Interface
Unit.
❒ Be sure to touch a metal object be-
fore touching the 1394 Interface
Unit to discharge static electricity.
Even a small amount of static elec-
tricity can damage the unit.
❒ Do not subject the 1394 Interface
Unit to physical shocks.
❒ Do not loop the 1394 interface ca-
ble.
❒ Use the 1394 Interface cable that
comes with 1394 Interface Unit.