Table of Contents
Advertisement
Inside
1
2
3
1.
Fusing Unit
Fuses the image on paper.
When "Replace Fusing Unit (Type C)" ap-
pears on the panel display, replace this
unit.
2.
Fuser Oil Unit
Attach to the Fusing Unit.
When "Replace Fuser Oil Unit (TypeG)"
appears on the panel display, replace this
unit.
3.
Waste Toner Bottle
Collects toner that is wasted during
printing.
When "Replace Waste Toner (Type E)"
appears on the panel display, replace
with a new waste toner bottle.
4.
Toner Cartridge
Loads from the printer rear in the order
of magenta (M), cyan (C), yellow (Y), and
black (K).
When "Add Toner: color" appears on the
panel display, replace the appropriate
toner cartridge.
5.
Photoconductor Unit
The printer comes with one black Photo-
conductor Unit and three color (yellow,
cyan, magenta) Photoconductor Units.
When "Replace Color PCU (Type A)" ap-
pears on the panel display, replace the
three color Photoconductor Units.
When "Replace Black PCU (Type F)" ap-
pears on the panel display, replace the
black Photoconductor Unit.
6.
Development Unit
The printer comes with one black Devel-
opment Unit and three color (yellow, cy-
an, magenta) Development Units.
When "Replace Color Dev. Unit(TypeB)"
appears on the panel display, replace the
three color Development Units.
When "Replace Black Dev. Unit(TypeD)"
appears on the panel display, replace the
black Development Unit.
7.
Inner Cover
Open this cover when replacing the Pho-
toconductor Unit or Development Unit.
Guide to the Printer
4
5
6
7
ZDJX703J
5
1
Advertisement
Table of Contents
