Table of Contents
Advertisement
Hardware Installation
7.
Set jumper JP7 according to the
CPU voltage supported.
8.
Set jumpers JP1, JP2, JP3, and
JP4 according to the frequency
supported by your CPU.
2.5
Upgrading the Microprocessor
To upgrade a CPU:
1.
Turn off the system power and remove the housing cover.
2.
Locate the CPU socket on the system board.
3.
Pull up the socket lever.
4.
Remove the installed CPU, if any.
2-6
CPU VOLTAGE SELECT
JP7
3.45V (default)
3.52V
CPU FREQUENCY SELECT
JP1
JP2
JP3
75 MHz
90 MHz
100 MHz
120 MHz
133 MHz
150 MHz
166 MHz
200 MHz
JP4
Advertisement
Table of Contents
