AOpen AP5V User Manual page 60

AMI BIOS Utility
Hard Disk Power-down Mode
This option lets you set when to
returns to full speed once the system resumes to normal mode. The available
Standby, Suspend,
settings are
Suspend.
is
Hard Disk Time-out (Minutes)
This option lets you specify when to set the hard disk to the specified power-
down mode. The setting range from
Standby Time-out (Minutes)
This function lets you set when to put the system into standby mode.
standby mode, the CPU clock slows down. Any event detected returns the
system to full power. The setting range from
Disabled
.
Suspend Time-out (Minutes)
This function lets you set when to put the system into suspend mode. In
suspend mode, the CPU clock stops. Any event detected returns the system to
full power. The settings are
Slow Clock Ratio
When the system enters the standby mode, the CPU clock starts to slow down.
This parameter lets you set the
1:1, 1:2, 1:4, 1:8, 1:16, 1:32, 1:64,
from
1:128 .
3-20
pin down your IDE hard disk. The disk
Disabled
and
1 ~ 15 Minutes
1 ~ 15 Minutes
1 ~15 Minutes
and
low down" clock ratio. The selections are
. The default setting
Disabled
and .
In
and
Disabled
.
and