Table of Contents
Advertisement
Type
This parameter lets you set the IDE device type that your system supports.
User
The options are
Installed
Auto
. Select
CD-ROM
or IDE device. Select
system. If you have an old type HDD installed, you may need to enter the HDD
parameters manually. To do this, you must set this parameter to
this to
Not Installed
LBA/Large Mode
This enhanced IDE feature allows the system to use a hard disk with a capacity
of more than 504 MB.
Address (LBA) mode translation. Set the parameter to
feature.
This parameter becomes nonconfigurable when the HDD Type parameter is set
to
Auto
.
Block Mode
This function enhanced disk performance depending on the hard disk in use. If
enabled, it allows data transfers in block (multiple sectors) by increasing the
data transfer rate to 256 bytes/cycle. However, if your hard disk does not
support this function, set this parameter to
This parameter becomes nonconfigurable when the HDD Type parameter is set
Auto
to
.
AMI BIOS Utility
Auto
CD-ROM
Type 1-46
,
,
,
to automatically configure the installed hard disk
CD-ROM
if you have a
to bypass the function.
This is made possible through the Logical Block
Off
.
Not
, and
installed in your
User
. Set
Off
to disregard the
3-5
Advertisement
Table of Contents
