3.2.6 Peripheral Setup
Peripheral
Select
appears.
Onboard FDC
This parameter enables or disables the floppy drive controller.
Onboard Serial Port 1
This parameter allows you to select the address for the first serial port. The
available settings are
Auto, 3F8h, 2F8h, 3E8h, 2E8h,
Disabled
Disabled
. Selecting
Onboard Serial Port 2
This parameter allows you to select the address for the second serial port. The
Auto, 3F8h, 2F8h, 3E8h, 2E8h,
available settings are
Disabled
Disabled
. Selecting
AMI BIOS Utility
from the Setup menu and the following screen
deactivates the port.
deactivates the port.
and
and
3-25