Installing The System Board - AOpen AP5V User Manual

2.9

Installing the System Board

Make sure that you have already installed the
system board components like the CPU and
memory, and have set the appropriate jumpers
before you proceed.
Follow these steps to install a system board into a housing:
1. Open the system housing. Refer to
the housing documentation
steps on how to remove the
housing cover.
2. Install the board into the housing
and secure it with the screws that
come with the housing.
3. Attach the cables and install the
necessary peripherals.
following section for information on
how to connect the peripherals.
Refer to your housing documentation for more
information on the system housing.
Hardware Installation
for
See the
2-15