AOpen AP5V User Manual page 66

AMI BIOS Utility
Onboard Parallel Port
This parameter allows you to select the address for the parallel port. The
available settings are
Disabled Disabled
. Selecting
This parameter specifies the parallel port mode.
Normal, EPP, and ECP
PARALLEL PORT ECP DMA CHANNEL 1
This parameter is configurable only if the Onboard Parallel Port is NOT set to
Auto . and the Parallel Port Mode is set to
ECP DMA channel for the parallel port function. The selections are
3
.
Make sure that your system board ECP DMA
setting and the Parallel Port ECP DMA
channel setting are the same.
Onboard IDE
This parameter enables or disables the IDE device(s) connected to your
system. The selections are
Disabled
.
3-26
Auto, 378h, 278h,
deactivates the parallel port.
PARALLEL PORT MODE
. The default is Normal.
ECP . This allows you to set an
Primary, Secondary, Both
3BCh,
and
The mode options are
0, 1
, and
and