Table of Contents
Advertisement
AMI BIOS Utility
Memory Hole
This option lets you assign the system memory area to avoid memory conflicts.
512~640K, 15~16M
Disabled
The settings are
and
.
DRAM Timing Setting
Auto
Manual
The selections for this parameter are
and
. If you select either
Auto
, the DRAM Timing subparameters become nonconfigurable since BIOS
Manual
automatically sets the values. Select
if you want to specify your own
parameter settings.
FAST MA TO RAS# DELAY
This option specifies the wait state between the master address (MA) and row
1 clock
2 clocks
address strobe (RAS) signals. The settings are
and
.
EDO:SPM READ BURST TIMING
This parameter adjusts the read wait state for Extended Data Out (EDO) DRAM
and Standard Page Mode (SPM) DRAM. Every time the CPU reads L2 cache
miss, it reads four continuous memory cycles on four continues addresses from
the EDO and SPM cache. Therefore, it has four settings to adjust.
The selections for this parameter are
x444/X444, X333/X444,
X222/X333,
X3222/X333
and
.
3-15
Advertisement
Table of Contents
