Table of Contents
Advertisement
AMI BIOS Utility
Quick Boot
During boot-up, the system performs power-on self test (POST) routines.
Enable the parameter if you want to skip some POST routines during the boot
Disabled
process. Set this to
to let the system perform all the POST
routines and follow the specified boot-up sequence.
Boot-up Sequence
The boot-up sequence allows you to specify the system search sequence. The
C:, A:, CD-ROM , A:, C:, CD-ROM
CD-
selections are
and
ROM, A:, C:.
If you have a bootable CD-ROM installed, you may set the
A:, C:, CD-ROM.
CD-ROM as the first priority. The default is
Boot-up Numlock
On
Setting this parameter to
enables the numeric function of the numeric
Off
keypad. Set this parameter to
to disregard the function. Disabling the
numeric function allows you to use the cursor control numeric keypad. The
default setting is
Off
.
Floppy Drive Swap
This parameter allows you to swap floppy drives. For example, if you have two
floppy drives (A and B), you can assign the first drive as drive B and the second
drive as drive A or vice-versa. Disable the parameter to bypass the function.
Disabled
The default is
.
Floppy Drive Seek
When enabled, BIOS detects whether there is a floppy disk drive installed in the
system. Disable the parameter to skip the function.
3-10
Advertisement
Table of Contents
