Left And Right Neutral Switch Replacement - Toro Z MASTER 4000 Series Service Manual

Hourmeter Installation (continued)
Hourmeter Test

Left and Right Neutral Switch Replacement

Left and Right Neutral Switch Removal
Electrical: Service and Repairs
g346221
3. Install the RH side pod to the RH console. Install the 4 (1/4-20 inch) torx
screws securing the RH side pod to the RH console.
4. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
With the ignition switch in the RUN position and the PTO switch closed (ON),
verify battery voltage and ground to the hourmeter.
g336418
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop and remove the key. Engage the
parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
Figure 82
Figure 83
Page 8–6 4000 Series Z MASTER® Service Manual
3442-427 Rev A