MYRIDE® Installation (continued)
4000 Series Z MASTER® Service Manual
3442-427 Rev A
4. Install the 4 (5/16 inch) lock nuts securing the 2 (1 shown below) bearing
brackets to the chassis.
g348084
5. Close the 2 plastic clamps securing the fuel and vent lines.
g348062
6. Install the floor pan.
7. Tighten the 2 (3/8 inch) lock nuts securing the lower front rear shocks to the
ROPS.
Figure 44
Figure 45
Page 5–23
Chassis: Service and Repairs