Toro Z MASTER 4000 Series Service Manual page 52

Right Console Removal (continued)
Right Console Installation
Chassis: Service and Repairs
9. Disconnect the wiring harness from the PTO switch.
g346222
10. Pinch together the 2 tabs on the PTO switch. Pushing from the bottom side
up, remove the PTO switch from the RH side pod.
11. Pinch together the 2 tabs on the ignition switch. Pushing from the bottom
side up, remove the ignition switch from the RH side pod.
12. Remove the 2 (5/16 inch) lock nuts and carriage bolts securing the RH
console to the chassis.
13. Lift the RH console away from the machine.
1. Install the RH console onto the machine.
2. Install the 2 (5/16 inch) lock nuts and carriage bolts securing the RH console
to the chassis.
3. Install the ignition switch to the RH side pod.
4. Install the PTO switch to the RH side pod.
5. Connect the wiring harness to the PTO switch.
g346222
Figure 25
Figure 26
Page 5–12 4000 Series Z MASTER® Service Manual
3442-427 Rev A