Motion Control Assembly Installation (continued)
Chassis: Service and Repairs
g337846
5. Connect the motion control damper to the motion control assembly and
torque the bolt to 108-135 N•m (90 ± 10 in-lb).
6. Install the motion control cover to the frame, secure with the 2 screws.
7. Connect the motion control handle to the motion control assembly.
8. Install the side console.
Console Replacement (page 5–13)
9. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
10. Adjust the neutral setting.
11. Adjust the tracking if necessary.
Figure 53
Right Console Replacement (page 5–11) Left
Page 5–32
4000 Series Z MASTER® Service Manual
3442-427 Rev A