Advertisement
POWER
When the DC Power cord is connected to the equipment, the console will automatically power up. If
there is no input to the console for 20 minutes the console will go to stand-by mode. In stand-by mode the
console display will turn off. To turn the console on press any button.
When initially powered on the console will perform an internal self-test. During this time all the lights will
turn on. When the lights go off, the Message Center will show the software version (i.e.: VER 1.0). The
distance window shows the distance in miles and the time window shows the total hours of use.
The odometer will remain displayed for only a few seconds then the console will go to the start up display.
The dot matrix display will be scrolling through the different profiles of the programs and the Message
Center will be scrolling the start up message. You may now begin to use the console.
DOT MATRIX CENTER DISPLAY
Twenty columns of boxes (8 high) indicate each segment of a workout. The boxes only show an
approximate level (resistance) of effort. They do not necessarily indicate a specific value – only an
approximate percent to compare levels of intensity. In Manual Operation the resistance dot matrix window
will build a profile "picture" as values are changed during a workout.
17
www.spiritfitness.com
Advertisement
