Table of Contents
Advertisement
the hob, yet the hob zone(s) may still be hot so extra care must be
taken.
Auto-heat function
Every zone is equipped with an auto-heat function, which reduces the
warming up time for the zone.
To activate the auto-heat function on a zone
•
Simply set the desired power level using the heat setting slider
sensor (11). Hold your finger in the same position on the slider
sensor for approximately three seconds, until the letter ' A ' appears.
•
The display will alternate between the set power level and 'A' for a
preset period of time, before reducing the power to the originally
selected heat setting. The duration of each auto-heat setting's
limiter is shown in the table below.
To deactivate the auto-heat function
•
Simply set the desired power level using the heat setting slider
sensor (11).
Zone Heat Setting
Maximum
Operating Time
(seconds)
Please note: The auto-heat function is not compatible with the keep
warm function or P (Boost).
1
2
3
4
5
48
144
228 372 408 120
6
7
8
9
P
168
216
12
- -
21
Advertisement
Table of Contents
Troubleshooting
