Extractor Plug Information - CDA HNE8FR Installation, Use And Maintenance Manual

Extractor plug information

Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A 3
amp fused plug. To change a fuse in this type of plug, follow the steps
below:
1. Remove the fuse cover (A) and fuse (B).
2. Fit a replacement 3A fuse, ASTA approved to BS 1362 type, into the
fuse cover.
3. Replace fuse cover.
Important: Do not use the appliance without the fuse cover in
position. Do not use the appliance nor plug it in if the plug is
damaged or any internal components are exposed in any way.
43