Related Manuals for CDA HN6013FR
Summary of Contents for CDA HN6013FR
- Page 1 HN6013FR Plug and Play induction hob Installation, use and maintenance www.cda.co.uk www.cda.co.uk...
-
Page 2: Table Of Contents
Contents: Important information Important safety warnings/notes Important notes for safety, use and care Pacemaker and active implants information Cooking on induction Important safety warnings Saving energy Using your hob(s) Hob layout Selecting suitable cookware (pan compatibility) Child lock Residual heat indicators 20 Booster function 22 Maximum operating time 22 Timer... - Page 3 Appliance information: Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with your appliance and to register your appliance for guarantee purposes. Appliance Model...
-
Page 4: Important Information
Electromagnetic compatibility Directive, 2014/30/EU ErP Directive, 2009/125/EC RoHS Directive, 2011/65/EU and has been marked with the following symbols IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU. At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer providing appliance recycling services. - Page 5 Warning: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. Warning: Danger of fire: do not store items on the cooking surfaces.
- Page 6 (2004/108/CE directives). To avoid interference between your hob and a pacemaker, your pacemaker must be designed and programmed in compliance with the regulations that apply to it. As such, CDA guarantee only that our product is compliant.
-
Page 7: Cooking On Induction
With regard to the compliance of the pacemaker or any potential incompatibility, you should obtain information from the manufacturer or your attending physician. Cooking on Induction The principle of induction cooking is based on magnetic effect. When you put your cookware on an induction zone and switch it on, the electronic boards in the hob produce induced currents in the base of the cookware and instantly raise its temperature. -
Page 8: Saving Energy
Important • Do not use the hob if the glass surface is cracked or damaged to prevent the risk of electric shock. Disconnect it from the power supply. • Ensure that the power cable of a connected electrical appliance near the hob is not in contact with the cooking zones. Saving energy Using energy in a responsible way not only saves money but also helps the environment. -
Page 9: Using Your Hob(S)
Using your hob Zones: 1. Front left Power Booster induction cooking zone 2. Back left Booster induction cooking zone 3. Back right Booster induction cooking zone 4. Front right Booster induction cooking zone Control Panel 12 13 14 15 1. Sensor on/off board with LED 10. - Page 10 Operation Before using the appliance for the first time • Thoroughly clean your induction hob first. The induction hob should be treated with the same care as a glass surface. • Switch on the ventilation in the room or open a window, as the appliance could emit an unpleasant smell during first use.
- Page 11 • High-frequency whizz. This noise arises in cookware made of multiple layers of different materials at maximum heat setting. The noise intensifies when using two or more cooking zones at maximum heat setting. The noise will stop or reduce when heat setting is reduced.
- Page 12 You will hear a beep and the selected maximum power setting will flash several times on the display and then the appliance will turn off. Now your operating induction hob will not exceed the total maximum power you selected. If you do not confirm the selected maximum power setting, your induction hob will turn off and operate with the previously selected maximum power or with the default power of 2.8kW.
- Page 13 Pan detection: allows the hob to detect pans placed on a cooking zone. Small objects placed on the cooking zone (eg, spoon, knife, ring ...) will not be recognised as pans and the hob will not operate. Pan detector Pan detector is installed in induction hobs. Pan detector starts heat- ing automatically when a pan is detected on a cooking zone and stops heating when it is removed.
- Page 14 When you finish cooking switch off the cooking zone using touch con- trol sensor fields and do not rely solely on the pan detector. Selecting cookware for induction cooking High-quality cookware is an essential condition for efficient induction cooking. Cookware characteristics Always use high quality cookware, with perfectly flat base.
- Page 15 interfere with the temperature induction control module and can cause overheating of the pot or pan. Do not use damaged cookware such as cookware with deformed • base due to excessive heat. When you use large ferromagnetic base cookware, whose diameter •...
- Page 16 Check for marking indicating that the cookware is suitable for induction cooking. Use magnetic cookware (enamelled steel, ferrite Marking of kitchen stainless steel, cast iron). The easiest way to deter- cookware mine if your cookware is suitable is to perform the “magnet test”.
- Page 17 Control panel Immediately after the appliance is connected to electrical mains, • all displays will light up briefly. Your appliance is then ready for use. The induction hob is equipped with electronic touch control • sensors, which are operated by touching with a finger for at least 1 second.
-
Page 18: Child Lock
If there are two or more pans on the hob when it is turned on, the hob will not activate the cooking zones automatically. You need to touch the sensor corresponding to your desired cooking zone. Use the heat setting touch sensors to set the heat setting •... -
Page 19: Residual Heat Indicators
Disconnecting the appliance from electrical mains deactivates the Child Lock. Residual heat indicator “h”, “H” When you have finished cooking, the induction hob glass within the cooking zone is still hot, this is called residual heat. If the glass temperature is higher than 60°C*, display of the cooking zone shows “H”. -
Page 20: Booster Function
Deactivate cooking zones Deactivate cooking zone by doing one of the following: Turn off the hob with the sensor. • Touch and hold the sensor for 3 seconds. • Activate the cooking zone - simultaneously touch and hold the heat •... - Page 21 Turn off the Booster function: Touch the Booster sensor or touch to reduce the heat setting. • Booster function can be activated for up to 5 minutes. Then power will be reduced to 14 (nominal power). Power will also be reduced to the nominal power, if any hob components overheat.
-
Page 22: Maximum Operating Time
Maximum operating times Cooking heat Maximum setting operating time In order to ensure the safety of users, the induction hob is fitted with an operating time limiter for each of the cooking zones. The maximum operating time is determined individually depending on the heat setting when cooking. - Page 23 Touch to add time and to reduce time. • To set the Time for the next cooking zone, follow the above steps by selecting a different cooking zone. Keep in mind that the Timer function can be set for each cooking zone. If more than one timer is set, the shortest duration is displayed.
-
Page 24: Minute Minder
Minute minder Use Minute Minder to count down time. The Minute Minder does not affect the operation of cooking zones. To set the Minute Minder: Turn on the hob. • Touch and set the Minute Minder duration by touching to add •... -
Page 25: Maintain Temperature
letter “H” or “h”, depending on cooking zone temperature (residual heat indicator). To deactivate the Stop’n go function touch the sensor again. Cooking zone displays will show the heat setting that was previously set before activation of the Stop’n go function. The Stop’n go function pauses the Timer countdown •... - Page 26 •Simmer 90 A programme intended for heating and cooking watery dishes. Place the pot with the food on the cooking zone and activate the programme. This programme maintains a temperature of 90°C. Sear 200 A programme intended for searing dishes that require high temperature.
- Page 27 Practical Everyday Tips Table of example hob settings. Time Function Dish Portion size [min] Brownie / chocolate Melt 40* Melt chocolate 300g fondant 1 piece Melt 40* Defrost Meat approx. 800g Proof yeast Melt 40* Yeast dough dough Parboil meats Keep Warm 70* Pork loin with spices and sausages...
-
Page 28: Fitting The Hob (Ventilation, Furniture Requirements Etc.)
Fitting the hob Unpacking the hob: Take care not to lose, drop or mishandle any parts. Fitting position of the hob: This appliance must be, when installed, a minimum of 50mm from any back wall and a minimum of 180mm away from any adjacent vertical surfaces, e.g. -
Page 29: Installation
Installation Making the worktop aperture • The worktop must be flat and level. Edge of the worktop near the wall must be sealed to prevent ingress of water or other liquids. • There should be sufficient spacing around the opening, in particular, at least 50 mm distance to the wall. - Page 30 Do not install the hob above an oven without ventilation. If fitting a cooker hood above the hob: If a cooker hood is to be installed above the hob, the height of the hood above the hob must be at least 600mm (650mm is recommended) (Fig.6).
- Page 31 Assembly of the gasket If the seal has not been fitted at the factory, proceed as follows:Before installing the hob in the cut-out worktop, the gasket is to be attached to the back of the hob.To do this, first peel off the protective film from the self-adhesive seal and glue the gasket as close as possible to the outer edge of the hob (fig 4).
-
Page 32: Electrical Information
Electrical Information Warning! This appliance must be earthed. Green and yellow to earth Brown to live 13A Fuse Cord Clamp Blue to Neutral The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below: 1. - Page 33 As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:- The wire which is coloured GREEN and YELLOW must be • connected to the terminal which is marked with the letter (E) or by the Earth symbol or coloured GREEN and YELLOW.
-
Page 34: Troubleshooting
Troubleshooting In the event of any fault: • Turn off the appliance • Disconnect the power supply • Have the appliance repaired • Based on the instructions given in the table below, some minor issues can be corrected by the user. Please check the consecutive points in the table before you refer the repair to customer service. - Page 35 Problem Possible Cause Remedy After turning on, the You have not used When turn on the appliance, use it appliance turns itself any appliance without delay. off. function. The maximum operat- The cooking zone has Activate the cooking zone again and ing time has been set the heat setting.
- Page 36 Specification Rated voltage: 220-240V~50 Hz 1N Rated power: 2.8kW Type: PBP4VI540L2FTB4AUUt HN6013FR Induction cooking zone power: - induction cooking zone: Ø 210-220 mm 2000W - induction cooking zone: Ø 160-180 mm 1400W - booster induction cooking zone: Ø 210-220 mm 2800W - booster induction cooking zone: Ø...
- Page 37 Product information given in accordance with Commission Regulation (EU) No 66/2014 supplementing Directive of the European Parliament and Council Directive 2009/125/EC with regard to eco-design requirements for household ovens, hobs and range hoods. Household electric hobs HN6013FR PBP4VI540L2FTB4AUUt Model identifier 21694 V / O / O...
-
Page 38: Care And Maintenance
Always use a soft sponge or cloth where possible. Utensils such as scouring sponges and some brushes could cause scratches to the hob top. Contacting CDA Customer Care A: Customer Care Department, The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY T: 01949 862 012 F: 01949 862 003 E: customer.care@cda.co.uk... -
Page 39: Cleaning Advice
Cleaning advice Type of residue Clean with Cleaning advice Wipe over the zone to be cleaned with Cleaning sponge Light a sponge and hot water, and then wipe and soft cloth off with a soft dry cloth. Wipe over the zone to be cleaned Accumulated baked- Cleaning sponge with a sponge and hot water, using a... - Page 40 For more information please contact: 01949 862 010 sales@cda.co.uk The Sales Department on or email Customer Care Department. The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY 01949 862 012 F: 01949 862 003 E: customer.care@cda.co.uk IO-HOB-1965 v1 / 8517172 www.cda.co.uk...