Pause function
The hob is equipped with a pause function that allows the user to
suspend the hob's operation for a brief period of time and to easily
continue cooking when convenient from the previously assigned
settings. This is particularly useful when your attention is drawn from
the hob, i.e. answering the door.
To activate the pause function
•
At least one hob zone must be active. Press the 'pause function
sensor' (8). All cooking zone indicators will show a pause symbol (II)
and the pause function sensor LED will illuminate.
To deactivate the pause function and resume cooking
•
Press the pause function sensor (8) so that the Pause function
LED goes out. A heat setting slider will then illuminate indicating
a swiping motion. Run the ball of your finger from left to right
to deactivate the pause, as the light indicates. The hob should then
resume cooking as it was before the pause function was activated.
Please note: The pause function can only be used for a maximum of
10 minutes. If the hob is not reactivated within this time then the hob
switches itself off.
The pause sensor can be used to restore the last-set cooking
settings if the on/off sensor (9) is accidentally activated and the hob
switched off during use. Simply switch the hob back on using the on/
off sensor (9) and press the pause function sensor (8). This feature
is only available for approximately 7 seconds after the hob has been
switched off.
16