D Selecting A Continuous Tone Channel - Icom iF4261DT Operating Manual

Table of Contents

Advertisement

Previous view
3
BASIC OPERATION
Selecting a channel (Continued)

D Selecting a Continuous tone channel

<Key operation>
1. While in the Analog mode, push [C.Tone CH Ent]
or [Tone/RAN CH Select] to display the "C.Tone
CH Select" screen.
2. Push [CH Up] or [CH Down] to select a
Continuous tone channel, then push [C.Tone CH
Ent] or [Tone/RAN CH Select] again.
• Sets the selected channel.
<Menu operation>
(MENU > CHANNEL > C.TONE SEL)
1. While in the Analog mode, push [Menu] to display
the "Menu" screen.
2. Push
[P2](Ω) or [P3](≈)
select "CHANNEL," and then push
[P2].
Portable
CHANNEL
BACK
ENT
Mobile
M E N U
C H A N N E L
3. Push
[P2](Ω) or [P3](≈)
select "C.TONE SEL," and then push
[P2].
Portable
CHANNEL
C.TONE SEL
BACK
ENT
Mobile
C H A N N E L
C . T O N E
S E L
or
[ΩP3] or [P4≈]
to
[P1](ENT)
or
or
[ΩP3] or [P4≈]
to
[P1](ENT)
or
4. Push
[P2](Ω) or [P3](≈)
select a Continuous tone channel, and then push
[P1](OK)
or [P2].
• Sets the selected channel.
Portable
C.TONE SEL
DEFAULT
CANC
OK
Mobile
C . T O N E
D E F A U L T
5. Push
[P0](BACK)
return to the Standby mode.
• The selected Continuous tone channel number is
displayed.
3-8
or
[ΩP3] or [P4≈]
to
S E L
or
[P1]
several times until you

Advertisement

Table of Contents
loading

This manual is also suitable for:

If6061d

Table of Contents