Icom iF4261DT Operating Manual page 46

Previous view
5
MENU SCREEN
Menu items
D Utility menu (Continued)
<Items>
Setting
• Backlight "BACKLIGHT"
Select the state of the backlight.
1. Push [P2](Ω) or [P3](≈)
select "OFF," "Auto" or "ON," and then push
(OK) or [P2] to save.
• OFF: Turns OFF the backlight.
• Auto: When any switch except [PTT] is pushed, the
backlight lights for 5 seconds.
• ON: Continuously turns ON the backlight.
• Push [P0](CANC) or [P1]
previous screen.
2. Push [P0](BACK) or
screen.
• Dimmer "DIMMER"
(For the Mobile type transceiver)
Select the state of the backlight brightness of the
display.
1. Push [ΩP3] or [P4≈]
"ON," and then push
• OFF: The backlight does not light dimly.
• DIM: When the "Dimmer" terminal of the D-Sub 25 pin
is activated, the backlight lights dimly.
• ON: The backlight continuously lights dimly.
• Push [P1] to cancel, and return to the previous screen.
2. Push [P1] to return to the previous screen.
• LCD Contrast "LCD CONTRAST"
Set the LCD contrast level.
1. Push [P2](Ω) or [P3](≈)
or more times to set the LCD contrast level to
between 0 (the lowest) and 127 (the highest), and
then push [P1](OK) or
• Push [P0](CANC) or [P1]
previous screen.
2. Push [P0](BACK) or
screen.
or [ΩP3] or [P4≈] to
[P1]
to cancel, and return to the
[P1] to return to the previous
to select "OFF," "DIM" or
[P2] to save.
or [ΩP3] or [P4≈] one
[P2] to save.
to cancel, and return to the
[P1] to return to the previous
• Beep "BEEP"
Turn the key-touch beeps ON or OFF.
NOTE: Even when "OFF" is selected, some beeps,
such as the lockout timer and TOT are not turned
OFF.
1. Push [P2](Ω) or [P3](≈)
select ON or OFF, and then push
to save.
• Push [P0](CANC)
previous screen.
2. Push [P0](BACK)
screen.
• Beep Level "BEEP LEVEL"
Set the key-touch beep level to between 1 and 5, or
between 1 (Linked) and 5 (Linked).
When a Linked option is selected, the beep level is
adjusted by [VOL].
1. Push [P2](Ω) or [P3](≈)
more times to set the beep level to between 1 and
5, or between 1 (Linked)* and 5 (Linked)*, and
then push [P1](OK)
• Push [P0](CANC)
previous screen.
* Between 1 (Linked) and 5 (Linked) are displayed as
"1M" and "5M."
2. Push [P0](BACK)
screen.
• Ringer Level "RING LEVEL"
Set the ringer level to between 1 and 5, or between 1
(Linked) and 5 (Linked).
When a Linked option is selected, the beep level is
adjusted by [VOL].
1. Push [P2](Ω) or [P3](≈)
more times to set the beep level to between 1 and
5, or between 1 (Linked)* and 5 (Linked)*, and
then push [P1](OK)
• Push [P0](CANC)
previous screen.
* Between 1 (Linked) and 5 (Linked) are displayed as
"1M" and "5M."
2. Push [P0](BACK)
screen.
5-12
or [ΩP3] or [P4≈]
[P1](OK)
or [P1] to cancel, and return to the
or [P1] to return to the previous
or [ΩP3] or [P4≈]
or [P2] to save.
or [P1] to cancel, and return to the
or [P1] to return to the previous
or [ΩP3] or [P4≈]
or [P2] to save.
or [P1] to cancel, and return to the
or [P1] to return to the previous
to
or [P2]
one or
one or