Table of Contents
Advertisement
Previous view
7
NXDN™ OPERATION
Transmitting a call
D Transmitting a Status message
<Menu operation> (Continued)
TIP: The Portable type transceiver's operations are
described in red. And the Mobile type transceiver's
operations are described in blue.
LThe common operations are in black.
Using the Message menu:
(MENU > MESSAGE > STATUS)
1. Push [Menu] to display the Menu screen.
• "CONTACT" is selected.
2. Push
[P2](Ω) or [P3](≈)
select "MESSAGE," then push
Portable
MESSAGE
BACK
ENT
Mobile
M E N U
M E S S A G E
3. Push
[P2](Ω) or [P3](≈)
select "STATUS," then push
Portable
MESSAGE
STATUS
BACK
ENT
Mobile
M E S S A G E
S T A T U S
• Enters the Status Message Selection mode.
or
[ΩP3] or [P4≈]
to
[P1](ENT)
or [P2].
or
[ΩP3] or [P4≈]
to
[P1](ENT)
or [P2].
4. Push
[P2](Ω) or [P3](≈)
select a status message.
Portable
STATUS
TX Status 01
BACK
TX
Mobile
S T A T U S
T X
S t a t u s
5. Hold down
[P1](TX)
message to the last called station or Talkgroup.
• "STAT OK" is displayed after receiving an
acknowledgement from the target station.
• "STA FAIL" is displayed if the target station does not
send back an acknowledgement.
7-9
or
[ΩP3] or [P4≈]
to
1
1
0 1
or
[P2]
to transmit the status
Advertisement
Table of Contents
