Icom iF4261DT Operating Manual page 69

Previous view
7
NXDN™ OPERATION
Transmitting a call
D Transmitting a Message (Continued)
<Key operation>
Using [Digital Button]:
1. Push [Digital Button] to enter the Application
Selection mode.
• The current call type is briefly displayed, then "VOICE"
is displayed.
LTo change the call type, see page 7-3.
2. Push [CH Up] or [CH Down] to select "MSG," then
push [Digital Button].
Portable
MSG
MENU DIGI ZONE SET
Mobile
M S G
• Enters the Message Selection mode.
3. Push [CH Up] or [CH Down] to select the
message, then push [Digital Button].
Portable
MSG
Hello!
MENU DIGI ZONE SET
Mobile
M S G
H e l l o !
• Enters the Destination ID Selection mode.
4. Push [CH Up] or [CH Down] to select the
destination ID.
Portable
MSG
TG1
MENU DIGI ZONE SET
Mobile
M S G
T G 1
5. Push [PTT] to transmit the message to the
selected station or Talkgroup.
• "MSG OK" is displayed after receiving an
acknowledgement from the target station.
• "MSG FAIL" is displayed if the target station does not
send back an acknowledgement.
7-14