Icom iF4261DT Operating Manual page 34

Previous view
4
ADVANCED OPERATION
User set mode
The User Set mode allows you to set seldom-changed
settings. If the transceiver has [User Set Mode]
assigned to it, you can "customize" the transceiver
operation to suit your preferences and operating style.
Entering the User Set mode:
1. Hold down [User Set Mode] for 1 second to enter
the User Set mode.
2. Push [User Set Mode] several times until you
select the appropriate item.
3. Push [CH Up] or [CH Down] to set the level or
condition.
• The selectable items can be preset using the
programming software. The presetable items are
Backlight, LCD contrast, Beep, Beep Level, Ringer
Level, SQL Level, AF Min Level, Mic Gain, VOX
Gain* 1 , VOX Delay* 1 , Horn*
Moni, Lone Worker and System Info.
* 1 Appears only for the Portable type transceivers and
the external VOX unit is connected.
* Appears only for the Mobile type transceivers.
2
4. Hold down [User Set Mode] for 1 second again to
exit the User Set mode.
2 , Battery Voltage, Signal
4-5