Viessmann Vitocal 200-S Installation And Service Instructions Manual page 54

Commissioning, inspection, maintenance
Commissioning the system
Note
Set system scheme 11 for the lag heat pumps in a
heat pump cascade.
Parameters for pumps and other components
Parameters
Heating circuit pump
"System definition"
Ó
"System scheme 7000"
DHW circulation pump
Extended menu
Ó
"Time program DHW circulation"
Circulation pump for DHW reheating
"External heat source"
"Enable external heat source 7B00"
"Enable external heat source for DHW heating 7B0D"
Extension kit, mixer for heating circuit M2/HC2
"System definition"
Ó
"System scheme 7000"
Remote control for heating/cooling circuit
"Heating circuit 1"/"Heating circuit 2"
"Remote control 2003"
or
"Remote control 3003"
Remote control for separate cooling circuit
"Cooling"
Ó
"Remote control cooling circ 7116"
"Ranking room temp sensor separate cooling circuit 7106"
54
Ó
Ó
(cont.)
Setting
■
■
Set a time program.
"1"
"1"
With heating circuit M2/HC2
Note
Set rotary switch S1 in the extension
kit to "2": See "Mixer extension kit" in-
stallation instructions.
"1"
Note
Set code on the Vitotrol to assign
heating circuits:
See "Vitotrol" installation instructions.
"1"
"0" Connection F16
"1" Heating circuit A1/HC1
"2" Heating circuit M2/HC2
"4" Separate cooling circuit SKK
With heating circuit A1/HC1 for heat-
ing circuit without mixer
or
With heating circuit M2/HC2 for
heating circuit with mixer