Mounting The Loop Handle - Stihl FS 111 Instruction Manual

English
6

Mounting the Loop Handle

6.1 Mounting Loop Handle with
Barrier Bar
2
► Fit the square nuts (1) in the barrier bar (2);
the holes must line up.
4
5
6
► Place the clamp (3) in the loop handle (4) and
position them both against the drive tube (5).
16
1
1
2
3
7
6 Mounting the Loop Handle
► Position the clamp (6) against the drive tube.
► Place the barrier bar (2) in position as shown.
► Line up the holes.
► Insert the screws (7) in the holes and screw
them into the barrier bar (2) as far as stop.
► Go to "Securing the Loop Handle".
6.2 Mounting the Loop Handle
without Barrier Bar
7
8
6
1
► Place the clamp (3) in the loop handle (4) and
position them both against the drive tube (5).
► Position the clamp (6) against the drive tube.
► Line up the holes.
► Fit washers (8) on the screws (7) and insert
the screws in the holes. Fit the square nuts (1)
and screw them down as far as stop.
► Go to "Securing the Loop Handle".
7
8
4
3
5
1
0458-430-0121-B