Transporting The Unit - Stihl FS 111 Instruction Manual

Hide thumbs Also See for FS 111:
Table of Contents

Advertisement

English
15.4
Other Hints on Starting
Engine stalls in cold start position g or under
acceleration.
► Move the choke knob to < and continue
cranking until the engine runs.
Engine does not start in warm start position <
► Move the choke knob to g and continue
cranking until the engine runs.
If the engine does not start
► Check that all settings are correct.
► Check that there is fuel in the tank and refuel if
necessary.
► Check that the spark plug boot is properly con‐
nected.
► Repeat the starting procedure.
Engine is flooded
► Move the choke knob to F and continue crank‐
ing until the engine runs.
Fuel tank run until completely dry
► After refueling, press the manual fuel pump
bulb at least five times – even if the bulb is
already filled with fuel.
► Set the choke lever to suit the engine temper‐
ature.
► Now start the engine.

16 Transporting the Unit

16.1
Using Transport Guard
The type of transport guard depends on the
metal cutting attachment supplied with the
machine. Transport guards are available as spe‐
cial accessories.
16.2
230 mm Grass Cutting Blades
28
16.3
250 mm Brush Knives
16 Transporting the Unit
0458-430-0121-B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs 111 r

Table of Contents