Mounting The Loop Handle; Adjusting Trimmer For User; Adjusting Length Of Shaft; Adjusting The Loop Handle - Stihl 45220115748 Instruction Manual

English
► Hold fanwheel (2) steady with one hand.
► Unscrew the mowing head (1) counterclockwise.
► Remove the fanwheel.
7.3

Mounting the Loop Handle

► Switch off the trimmer and remove the battery.
2
1
► Line up the loop handle (2) so that the recess for the star
knob nut (1) is on the right of the control handle and the
openings in the loop handle (2) are facing the operator.
► Ease the ends of the loop handle (2) apart and push it onto
the control handle until it engages in position.
► Insert the screw (3) through the hole.
► Fit the star knob nut (1) and tighten it down.
The loop handle (2) must not be removed again.

8 Adjusting Trimmer for User

8.1

Adjusting Length of Shaft

The length of the shaft can be adjusted to suit the height and
reach of the user.
► Switch off the trimmer and remove the battery.
► Hold the shaft firmly.
46
3
► Depress lock button (1) and hold it in that position.
► Pull or push the control handle (2) to the required position.
► Release the lock button (1).
► Move the control handle (2) back and forth until it
engages.
8.2

Adjusting the Loop Handle

The loop handle can be set in different positions to suit the
height and reach of the user.
► Switch off the trimmer and remove the battery.
► Loosen the star knob nut (1).
► Swing the loop handle (2) to the required position.
► Tighten down the star knob nut (1) firmly.
8 Adjusting Trimmer for User
1
2
2
1
0458-806-9821-A