Stihl FS 111 Instruction Manual page 25

14 Balancing the Machine
2
1
► Loosen the screw (1).
► Slide the carrying ring (2) along the drive tube.
► Tighten the screw (1) moderately.
► Allow the unit to hang freely.
► Check the position obtained:
Balanced positions
Mowing tools (A) such as mowing heads, grass
cutting blades and brush knives
► should just touch the ground.
0458-430-0121-B
Circular saw blades (B)
► should "hover" about 20 cm (8 in) above the
ground.
When the correct balanced position has been
reached:
► Tighten down the screw (1) on the carrying
ring firmly.
14.3
A
► Press down the bar on the carabiner (1) and
pull the carrying ring (2) out of the carabiner.
B
Disconnecting Machine from
Harness
1
2
English
1
2
1
2
25