Stihl FS 111 Instruction Manual page 15

5 Mounting the Bike Handle
5.1.4 Fitting the Throttle Cable
NOTICE
Do not kink the throttle cable or lay it in tight radii
– make sure the throttle trigger moves freely.
► Position the clamp (15) and handle sup‐
port (14) against the drive tube.
► Close the throttle cable retainer (15). The
retainer (15) snaps into place.
5.1.5 Adjusting the Throttle Cable
► Check adjustment of throttle cable – see chap‐
ter on "Adjusting the Throttle Cable".
0458-430-0121-B
15 14
14
15
15
5.1.6 Swiveling the Handlebar
Transport position
► Loosen the wing screw (3) and unscrew it until
the handlebar (7) can be rotated.
► Rotate the handlebar 90° counterclockwise
and then swing the handles down.
► Tighten down the wing screw (3) firmly.
Working position
► Reverse the sequence described above to
swing the handles up and turn the handlebar
clockwise.
English
90°
3
7
15