Setting The Brightness; Testing The Touchscreen - DURKOPP ADLER 911-210-3020-10 Operating Instructions Manual

5.12.4 Setting the brightness

To set the brightness:
1. In the menu item
2. In the following window press the
 A window with slider controls is displayed.
3. Pull the corresponding slider control up or down to change the value.
 The changes are immediately visible on the display.

5.12.5 Testing the touchscreen

You can use the
(Settings)
correctly over all areas of the screen.
To test the touchscreen:
1. In the menu item
2. In the following window press the
 An empty window is opened.
3. Use your finger to press various different points or draw lines.
 When the touchscreen is functioning correctly all touched points of
78
Extras
(Settings)
press the
(Control panel settings)
Helligkeit (Brightness)
Extras
menu item to check that the touchscreen is functioning
Extras
(Settings) press the
(Control panel settings)
the screen are marked.
Service Einstellungen
> >
Bedienfeld-Einstellungen
option.
Kontrast (Contrast)
option.
> Service > Einstellungen
> Service > Einstellungen
Bedienfeld-Einstellungen
option.
Touch Test
Operating Instructions 911-210-10 - 00.0 - 06/2020
Programming
option.