Copying A Seam Program Or Seam Sequence - DURKOPP ADLER 911-210-3020-10 Operating Instructions Manual

4. Enter the desired name and adopt the change by pressing
 The seam program or seam sequence is now available under this

5.10.7 Copying a seam program or seam sequence

You can also copy seam programs or seam sequences from a USB key
to the control or from the control to a USB key.
Important
Not all commonly available USB keys are suitable for the copying process.
You can obtain a suitable USB key from Dürkopp Adler.
To copy a seam program or a seam sequence:
1. Press the menu items
 The window for selecting the file to be copied appears:
Fig. 44: Copying a seam program or seam sequence
(1) - Select the source to be copied
2. Use the buttons (1) to select whether the data is to be copied from
 The selected button is highlighted with a dark background.
Information
You can use the
more manageable ( p. 42).
3. Press the desired file.
 The selected file is highlighted with a dark background.
68
OK (CR) ( p. 43).
name for sewing, editing or copying.
①
the DAC control or the USB key.
The files present at this location are listed in a selection window (2).
Dateifilter (File Filter)
Datei (File)
>
(2) - File selection window
Operating Instructions 911-210-10 - 00.0 - 06/2020
Programming
Kopieren (Copy)
②
to make the list
.