Table of Contents
Advertisement
Fig. 38: Changing the contour of a seam program (1)
(1) - Cursor
2. Use the arrow buttons to move the cursor (1) to the position on
Information
You can also use the slider control on the scale (2) to select the stitching
area you wish to change:
The first stitch of the seam pattern is at the top and the last stitch is at
the bottom.
3. Press the Go To button.
The selected contour region is displayed in detail.
Fig. 39: Changing the contour of a seam program (2)
(3) - Old stitching point
4. Use the arrow buttons to move the stitching point to the new position (4).
The modified seam path is displayed in green.
5. Press the Weiter (Next) button.
The window for selecting the technology operations opens.
58
①
the contour that is to be changed.
The stitching point (2) to be modified is marked in red.
③
④
(2) - Scale: First to last stitch
(4) - New stitching point
Operating Instructions 911-210-10 - 00.0 - 06/2020
Programming
②
Advertisement
Table of Contents
