5.14 Initializing the control and performing updates
You can use
(Initialization) and Update
panel to the factory defaults and to update the control with a new software
version.
To initialize the control and perform updates:
1. Press the menu items
The screen for initialization and update appears.
Fig. 54: Initializing the control and performing updates
84
Symbol
Meaning
Control unit events
List of the latest errors
Log configuration
Only for Dürkopp Adler Service personnel
Log display
List of the last log settings
State of control panel
Status appears in the log display
Extras
(Initialization) and Update
Service
Initialisierung
>
>
to reset the control and control
Extras
Service
>
Operating Instructions 911-210-10 - 00.0 - 06/2020
Programming
Initialisierung
>
.