Partially Populated Enclosures - Western Digital Ultrastar Data60 User Manual

User Guide
If the command was successful,
Step 4 : Repeat the
verify that the nickname was set as intended:
# sg_ses <device> -p0xf
<manufacturer>
Subenclosure nickname status diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
Clear the Nickname
Step 5 : If needed, use the
subenclosure's nickname (set it to an empty string):
# sg_ses <device> -p0xf -c --nickname=
<manufacturer>
If the command was successful,
Step 6 : Repeat the
verify that the nickname was cleared:
# sg_ses <device> -p0xf
<manufacturer>
Subenclosure nickname status diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
5.5 Partially Populated Enclosures
No errors
Note: If the nickname contains one or more spaces, enclose the name in either
single quotes (i.e. 'device nickname') or double quotes (i.e. "device nickname").
sg_ses <device> -p0xf
<regulatorymodel>
subenclosure identifier: 0
nickname status: 0x0
nickname additional status: 0x0
nickname language code:
nickname: <nickname>
sg_ses <device> -p0xf -c --nickname=
<regulatorymodel>
No errors
sg_ses <device> -p0xf
<regulatorymodel>
subenclosure identifier: 0
nickname status: 0x0
nickname additional status: 0x0
nickname language code:
nickname:

5.5 Partially Populated Enclosures

will be returned.
No errors
command to view the Subenclosure Nickname page and
<firmwareversion>
<firmwareversion>
will be returned.
No errors
command to view the Subenclosure Nickname page and
<firmwareversion>
5. System Management
command to clear the
204