Western Digital Ultrastar Data60 User Manual page 106

User Guide
b. Remove one cable at a time from the arm, making sure not to put too much strain on the
arm.
Step 6 : Remove the CMA(s).
a. Release all of the connectors that attach the CMA(s) to the enclosure and the rail.
b. To release a connector, press the blue latch release button and pull the connector free.
Step 7 : Complete the previous step for the second CMA.
Figure 93: Open Baskets
There are three total connections that need to be released, one at the elbow and two
at the opposite end.
Figure 94: Unlatching a CMA Connector
4. Part Replacement
4.8 Rails Replacement
96