Extras - Siemens SINAMICS Series Operating Instructions Manual

Menu

6.5 Extras

Unexpected behaviour of Inverter
During the transfer of data to and from the Inverter, it is essential that the transfer is not
interrupted and the process is allowed to be completed. If the process is interrupted, it is
possible that the data could be corrupted and the system may behave in an unexpected
manner. Should an interruption of the transfer process occur, then it is highly recommended
that a factory reset of the Inverter is performed prior to any further parameterization or
giving the Inverter control of the application.
Fault screen during up/download
If during the up/download process a fault occurs and the fault screen is displayed, press
Esc if you wish the up/download to be continued. If OK is pressed, it will cancel the
up/download process.
Safety Parameters
If safety parameters are to be downloaded a function test of the safety functions has to be
performed. Please refer to the "Safety Integrated Function Manual" which can be found at
the hyperlink below.
See also
Safety Integrated Function Manual
(http://support.automation.siemens.com/WW/view/en/50736819)
6.5 Extras
Overview
The Extras menu presents a number of options for the
configuration of the IOP, these are:
• Status-screen wizard
• Drive identity
• Parameter settings
• Panel settings
60
WARNING
Operating Instructions, 04/2015, FW V1.5.1, A5E00110011C AB
Intelligent Operator Panel (IOP)